NUX DRUM&LOOP

Looper pedal and drum machine 

Loops made easy

The JTC Drum & Loop is a two-in-one pedal, integrating both a looper and a complete drum machine. The looper provides you with up to 6 hours of recording capacity on 256 user slots, so you never run out of space. Control at the foot of the looper is provided by the left multifunction switch, according to a well-proven operating scheme: a press to start the recording, a new press to cut it and start playback, and a third to record overdubs. A long press also allows you to cut and re-enable the playback of the overdub. A second operating scheme, activating the overdub from the second press, is also available!

A very complete drum machine

In parallel with this very complete looper, the JTC integrates a drum machine no less complete and effective to accompany you effectively in the studio or live. It puts at your disposal no less than 25 rhythms in 4/4, 10 in 3/4 and 5 shuffle rhythms more focused Blues, adjustable in a tempo range between 40 and 240 BPM. For lovers of on-the-fly tuning, the BPM can also be changed via the tap tempo on the left switch, before starting recording and when the drum track is active. To start the drum machine, nothing could be simpler: a simple press on the switch at the right foot, and off you go! A new tap launches a fill, while a double tap will disable the battery.

- Display: LCD screen, Led

- Power supply: DC 9 V

- Category: Looper & drum machine

- Switch: 2 switches at the foot

- Dimensions (mm): 105 x 115 x 57

- Simultaneous effects: 2

- Inputs: USB, Jack, Expression pedal

- Format: Pedal

- User memories: 256

- Weight (kg): 0.425 kg

- Settings: loop level, tempo, memory select, rhythm level, save, stop modes, tempo select

- H.P. simulations: 1

- Outputs: Jack amp, Jack Mixer

- Technology: Digital

- Additional specs:

- 24-bit audio quality

- 6 hours of recording

- 3 shutdown modes and 2 start modes

- 25 rhythms in 4/4, 10 in 3/4 and 5 in shuffle

- Adjustable tempo from 40 to 240 BPM

- 2 loop modes: Record/Play or Record/Overdub

- 3 output modes: L = guitar, R = drums / L = drums, R = guitar / guitar and drums in L and R

- Drum frequency optimization system to improve the sound of percussion on small amplifiers

Many parameters available and complete connectivity

To adjust the balance between your loop and the drum machine, the JTC has two potentiometers on the front to adjust the level of each part. It also offers three playback stop modes, ranging from instant shutdown to smooth fade, and two start modes: pressing the switch, or by picking up an input signal to facilitate startup by keeping a long press on the switch. On the output side, the JTC is not to be outdone with a pair of stereo output in jack format, the left being dedicated to the amplifier level, the right for mixers with integrated speaker emulation.